DIY Acoustic Treatment
ultrafoam low-mid trap
Improve the frequency response and decay time of low to mid-range frequencies (125 to 1000 Hz); designed to be used where two surfaces meet at 90 degrees (usually where a wall meets the ceiling).
Size: 450 W x 1000 H x 160 D (mm)
Recommendations on Use:
Low to mid range frequencies are best treated by placing absorbers in corners where two surfaces meet at 90 degrees; here they work not only to reduce the reverberation time of low to mid range frequencies but also to reduce the nodes and anti-nodes (peaks and troughs) in these frequencies.
Low-mid traps are commonly placed mid-distance along front, rear and/or side walls where the wall meets the ceiling. They can also be installed in the corner behind our Bass Traps in the front and rear corners of the room. This arrangement delivers the cumulative performance of both products as well as saving floor space and improving the performance of the Bass Traps.
The following is a very rough guide:
- For Small Rooms (2700W x 3300D x 2400H) you'll need four (4) low-mid traps.
- For Medium Rooms (3000W x 3600D x 2400H) you'll need six (6) low-mid traps.
- For Large Rooms (3300W x 4200D x 2700H) you'll need eight (8) low-mid traps.